close_icon

Specifications

Dimensions
  • Overall length: 5224 mm
  • Overall width: 1900 mm
  • Overall height: 1097 mm
    (including FOM roll hoop camera)
  • Wheelbase: 3135 mm
  • Overall weight: 750 kg
    (driver on-board)
Engine
  • V6 - 3.4 litre single turbo charged
    Mecachrome engine.
  • Rated to 620 HP @ 8750 rpm.
  • Fly by wire accelerator system.
  • Rebuild after 8000 km.
  • Maximum Torque 570 Nm @ 6000 rpm.
Performances
  • Acceleration: 0 - 100 km/h, 2.90 sec
  • Acceleration: 0 - 200 km/h, 6.60 sec
  • Maximum speed: 335 km/h
    (Monza aero configuration + DRS)
  • Max. braking deceleration -3.5 G
  • Max. lateral acceleration +/- 3.9 G
Safety standards
  • Full FIA F1 2017 safety standards.
  • Halo F1 specification.
Monocoque and Bodywork
  • Survival cell - Sandwich Carbon/aluminium honeycomb structure made by Dallara.
  • Front and rear wing - Carbon structures made by Dallara.
  • Bodywork - Carbon - Kevlar honeycomb structures made by Dallara.
DRS
  • Same functionality of DRS used in Formula One.
  • Hydraulic activation.
Gearbox
  • 6-speed longitudinal Hewland sequential gearbox.
  • Electro-hydraulic command via paddle shift from steering wheel.
  • ZF SACHS Carbon clutch.
  • No on-board starter, anti-stall system.
  • Non hydraulic ramp differential.
Fuel cell
  • FIA Standard.
  • Premier FT5 125 litres.
Electronic features
  • Magneti Marelli Marvel SRG 480 ECU/GCU including data logging system.
  • Magneti Marelli PDU 12-42 power supply management unit.
  • CAN data acquisition pre-equipment.
  • Beacon receiver.
Suspension
  • Double steel wishbones, pushrod operated, twin dampers and torsion bars suspension (F) and spring suspension (R).
  • Adjustable ride height, camber and toe.
  • Two way (F) / Four way (R) adjustable Koni dampers.
  • Adjustable anti-roll bar (Front/Rear).
Brakes
  • 6 pistons monobloc Brembo callipers.
  • TBC carbon-carbon brake discs and pads.
Wheels and tyres
  • F1 2016 standard wheel dimension.
  • O.Z. Racing.
  • Magnesium rims
  • 13” x 12” front F1 2016 standard wheel dimension.
  • 13” x 13.7” rear F1 2016 standard wheel dimension.
  • F2 specific Pirelli slick / wet tyres.
Steering system
  • Non assisted rack and pinion steering system.
  • XAP steering wheel with dashboard, marshalling display, gear change and clutch paddles, marshalling & VSC display.
Camera equipment
  • Roll hoop, nose cone and face shot camera pre-equipment.